Peugeot 508 Engine Mount: Specs, Fitment & Common Faults
On the 508, a case shows Peugeot was internally aware of a widespread mount knock issue without a fix — plus a technician's trick worth knowing.
Opens live listings in a new tab.
OEM Part Number: confirm via VIN
Aftermarket mountings: Febi 32715 / Swag 62932715
| Engine Mount — Right upper (aftermarket) | Febi 32715, Swag 62932715 |
|---|---|
| Engine Mount — Rear (aftermarket) | Original Imperium 38909, Febi 172396 |
| Engine Mount — Rear lower (aftermarket) | Delphi TEM141, Metzger 8053775 |
| Genuine (OE) number | Not quoted in the catalogue listings — mounts differ by engine and gearbox, so order the genuine ones against your VIN |
| Fitment notes | The listing above shows examples for the engines checked; petrol, diesel, manual and automatic versions often use different mounts, and cars usually have more than one mount. |
A knock over speed bumps that keeps returning
If you're chasing a knock over speed bumps that seems to come from the engine mount area but keeps returning after repairs, this is useful to know about: a documented forum thread from an owner of a related Peugeot model describes their dealer confirming directly that Peugeot was internally aware of a widespread engine mount knocking issue and was "looking for a fix" — while the owner's own car continued knocking despite the top and bottom mounts already being greased under warranty. The owner had raised a formal complaint months earlier with no resolution by the time of posting. If you're experiencing a persistent, hard-to-fix mount knock, it's worth asking your dealer directly whether an updated part or revised fix now exists, since these things do sometimes get resolved with a later parts revision even if there wasn't one when the issue was first reported.
Worth knowing as a useful diagnostic clue: a knock that's noticeably louder going downhill than uphill points more toward the front shocks or struts extending and contracting under changing load, rather than the engine mount itself — worth mentioning this specific pattern to a technician if it matches what you're experiencing.
Watch: replacing itThe job the mountings do on the 508
Engine mounts secure the engine and transmission to the chassis while absorbing vibration and movement, preventing that vibration from transferring directly into the cabin. Most versions of the 508 use several mounts working together — typically at least one on each side of the engine plus a torque mount — and a single failed mount can throw off the whole assembly's balance.
Opens live listings in a new tab.
Diagnosing wear on the 508 and picking replacements
These are the same regardless of make or model — see our full Engine Mount Guide for warning signs to watch for (including some make-specific quirks in how they show up), confirming fitment against your VIN, and which aftermarket approach is worth trusting.
The same part on other modelsThe same part, covered across other Peugeot models.