Skoda Karoq Rear Springs: Specs, Fitment & Common Faults
Confirmed directly in VW Group's own workshop documentation: the rear spring is a separate, distinct assembly from the shock absorber, even on the simpler torsion beam axle.
Opens live listings in a new tab.
OEM Part Number: confirm via VIN
Aftermarket coils: Monroe SP4351 / Ashika ZCA7119A
| Rear coil springs (aftermarket) | Monroe SP4351 (328 mm); Ashika ZCA7119A (356 mm); Abakus 234-02-190; Denckermann D700614 |
|---|---|
| Genuine (OE) numbers quoted | None quoted in the catalogue listings — the genuine spring varies by engine, suspension type and body style, so order it against your VIN |
| Torsion beam axle, standard rate | Confirm the colour-code marking on your existing spring before ordering — VW Group uses this to distinguish rate variants within the same axle type |
| Multi-link axle (higher-output/4Motion variants) | A different spring and spring seat design from the torsion beam version, reflecting the different axle architecture |
| Estate/higher-load body style, where applicable | a stiffer rear spring rate than the equivalent standard body style, to handle the increased load-carrying capacity |
The Skoda Karoq's rear springs should always go in as a pair — fitting one new spring alongside an old, sagged one on the opposite side leaves the car sitting unevenly and biases how it handles.
Replacing coils without the dampers on the Karoq
Worth knowing on the Skoda Karoq: VW Group's own workshop manuals list the rear spring as a distinct removal and installation step from the shock absorber, with its own upper and lower spring seats — even on the simpler torsion beam rear axle. This means a spring can fail (sag, crack, or corrode through) independently of the shock absorber, and vice versa, so it's worth diagnosing which has actually failed before assuming both need replacing together.
What a cracked coil does to the Karoq's ride height
On the Skoda Karoq, rear spring sag tends to creep in gradually over months, with little more than a slightly lower ride height to show for it, before ending suddenly at the coil's end with an audible clunk — worth remembering if one rear corner starts sitting noticeably lower than the other.
This video shows a closely related car on the same platform, so the spring seats and fixings can differ slightly on yours.
Coils and dampers working together
The Skoda Karoq's rear coil spring supports the weight of the car's rear end and absorbs the initial impact of a bump, working alongside the shock absorber (which controls the spring's rate of compression and rebound) rather than replacing its function. A sagged or broken spring lowers ride height, can affect headlight aim, and in severe cases is an MOT failure item.
Opens live listings in a new tab.
These are the same regardless of make or model — see our full Rear Springs Guide for symptoms of a failing spring, confirming fitment against your VIN, and OEM vs aftermarket guidance.
The same part on other modelsThe same part, covered across other Skoda models.