Car Parts Guide
REAR SPRINGS Skoda Octavia · PARTS GUIDE

Skoda Octavia Rear Springs: Specs, Fitment & Common Faults

Confirmed directly in VW Group's own workshop documentation: the rear spring is a separate, distinct assembly from the shock absorber, even on the simpler torsion beam axle.

Skoda Octavia (MK3 2013-2020) rear coil spring, free length 367 mm, aftermarket Sachs 994999 Illustration for editorial purposes
Find Skoda Octavia Rear Springs Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN

Aftermarket coils: Sachs 994999 / Suplex 39607

Accuracy note: Covers the Skoda Octavia (Mk3 2013-2020) as listed in the UK aftermarket catalogues. Rear coil springs are sold as a pair for the axle and should be replaced as a pair, because a new spring beside a tired one leaves the car sitting unevenly. The right spring depends on the engine and gearbox, the suspension type (standard, sport or heavy-duty) and, on some cars, the body style. The references below are UK aftermarket catalogue listings for this generation, labelled by brand with the fitment details the catalogue gives; carmakers rarely publish the genuine number against these, so match a genuine spring against your VIN if you want a guaranteed fit. Rear springs are sold in left/right pairs matched to a specific colour-coded rate marking — confirm the paint code on your existing spring rather than assuming from trim alone, since the same trim can carry different spring rates depending on options fitted.
Rear coil springs (aftermarket)Sachs 994999 (standard, 367 mm); Suplex 39607 (standard, 367 mm); Vika 55111601401; Borsehung B12566
Genuine (OE) numbers quotedNone quoted in the catalogue listings — the genuine spring varies by engine, suspension type and body style, so order it against your VIN
Torsion beam axle, standard rateConfirm the colour-code marking on your existing spring before ordering — VW Group uses this to distinguish rate variants within the same axle type
Multi-link axle (higher-output/4Motion variants)A different spring and spring seat design from the torsion beam version, reflecting the different axle architecture
Estate/higher-load body style, where applicablea stiffer rear spring rate than the equivalent standard body style, to handle the increased load-carrying capacity

It's worth doing the Skoda Octavia's rear springs as a pair rather than one at a time — mixing a new spring with an old, sagged one on the opposite side throws off ride height evenly and skews handling.

The separate coil spring on the Octavia

Worth knowing on the Skoda Octavia: VW Group's own workshop manuals list the rear spring as a distinct removal and installation step from the shock absorber, with its own upper and lower spring seats — even on the simpler torsion beam rear axle. This means a spring can fail (sag, crack, or corrode through) independently of the shock absorber, and vice versa, so it's worth diagnosing which has actually failed before assuming both need replacing together.

The Octavia uses a torsion beam rear axle on standard smaller-engined cars, and a multi-link axle on higher-output and any 4Motion/4Drive/Quattro (four-wheel-drive) variant — the spring seat design and spring rate differ between the two, so confirm your exact axle type before ordering.

How a broken coil shows up

It's a slow decline followed by a sudden failure with the Skoda Octavia's rear springs — a gradually lower ride height for months, then an abrupt break at the coil's end announced by a clunk. One rear corner sitting visibly lower than the other is the sign to watch for.

Before you buy: rear axle type, trim, and body style all affect spring rate and fitment. Always confirm against your VIN before ordering.
Watch: replacing them

🎬 Watch: How to change rear springs / coil springs on OCTAVIA 1Z5 [TUTORIAL AUTODOC]

Watch on YouTube ↗

This video is of an earlier generation of the same model; the job is similar but the spring seats and fixings can differ slightly.

Skoda Octavia Rear Springs reference plate

Carrying the load

The Skoda Octavia's rear coil spring supports the weight of the car's rear end and absorbs the initial impact of a bump, working alongside the shock absorber (which controls the spring's rate of compression and rebound) rather than replacing its function. A sagged or broken spring lowers ride height, can affect headlight aim, and in severe cases is an MOT failure item.

Find Skoda Octavia Rear Springs Here!

Opens live listings in a new tab.

Warning signs, DIY difficulty and aftermarket advice

These are the same regardless of make or model — see our full Rear Springs Guide for symptoms of a failing spring, confirming fitment against your VIN, and OEM vs aftermarket guidance.

The same part on other models

The same part, covered across other Skoda models.