Toyota Aygo Rear Bumper: Fitment, Sensors & Common Damage
On the Aygo, the factory reversing camera runs on 6V, not 12V — — check this before any aftermarket stereo work.
Opens live listings in a new tab.
OEM Part Number: confirm via VIN
Aftermarket covers: Prasco TY2061061 / Van Wezel 5409544
| Rear bumper covers (aftermarket) | Prasco TY2061061 (Rear, primed); Van Wezel 5409544 (Rear, primed, Smooth); Diederichs 6601055 (Rear, for vehicles without parking sensors, primed); Blic 5506-00-8102950Q (Rear, from 06.2014, to 04.2018); Klokkerholm 8102950A1 (Rear, Colour: black) |
|---|---|
| Lower sections, corners & trims | None listed separately |
| Genuine (OE) numbers quoted | None quoted in the catalogue listings — the genuine cover varies by body style, parking sensors and tow bar, so order it against your VIN |
| Fitment notes | Match body style, facelift date and the holes for parking sensors or exhaust trims; covers come primed and need painting to your paint code before fitting. |
What the Aygo needs to keep its camera after a stereo swap
If you're fitting an aftermarket stereo and trying to keep the factory reversing camera working, the factory camera runs on 6V specifically, not the standard 12V most generic wiring guides assume. One case on a related model saw a camera stay permanently on regardless of gear selected, only resolved once a proper 12V-to-6V step-down converter was correctly fitted.
Also, towbar wiring kits can be confusing to match against factory wiring colours, since generic kit instructions rarely specify which factory wire colour corresponds to which function on your specific car.
A reversing bump on the Aygo: what gets disturbed
The Toyota Aygo's rear bumper carries more hardware than older cars used to — parking sensors, a reversing camera housing, occasionally exhaust trim finishers — which is exactly why even a minor kerb knock can mean more than just ordering a replacement panel.
Watch: replacing itThe sequence is much the same on this generation: wheel-arch liner screws, the fixings along the boot aperture and under the lower edge, then unclip each corner from the wing and unplug any sensor loom before the cover comes away.
The job the back panel does on the Aygo
Beyond absorbing minor impacts, the rear bumper on higher trims of the Aygo often houses parking sensors, a reversing camera, and sometimes integrated exhaust finishers. A bumper that looks compatible can still be missing the correct cutouts or wiring provisions for your specific trim's equipment.
Generations and Colour| All generations | Pure White, Chilli Red, Cocoa Brown, Ginger Beige |
|---|
Opens live listings in a new tab.
These are the same regardless of make or model — see our full Rear Bumper Guide for common damage types, confirming fitment (body style and sensor equipment matter here), and OEM vs aftermarket guidance.
The same part on other modelsThe same part, covered across other Toyota models.