Toyota Yaris Rear Bumper: Fitment, Sensors & Common Damage
On the Yaris, the factory reversing camera runs on 6V, not 12V — — check this before any aftermarket stereo work.
Opens live listings in a new tab.
OEM Part Number: confirm via VIN
Aftermarket covers: Prasco TY3301051 / Van Wezel 5344540
| Rear bumper covers (aftermarket) | Prasco TY3301051 (Rear, Colour: black, Smooth); Prasco TY3281051 (Rear, Colour: black); Prasco TY3301061 (Rear, primed); Van Wezel 5344540 (Rear, Colour: black, Smooth, for facelift); Van Wezel 5437540 (Rear); Van Wezel 5428540 (Rear, Colour: black, for vehicles with parking sensors, for vehicles without parking sensors, Smooth, for facelift) |
|---|---|
| Lower sections, corners & trims | None listed separately |
| Genuine (OE) numbers quoted | None quoted in the catalogue listings — the genuine cover varies by body style, parking sensors and tow bar, so order it against your VIN |
| Fitment notes | Match body style, facelift date and the holes for parking sensors or exhaust trims; covers come primed and need painting to your paint code before fitting. |
Camera compatibility for Yaris stereo upgrades
If you're fitting an aftermarket stereo and trying to keep the factory reversing camera working, the factory camera runs on 6V specifically, not the standard 12V most generic wiring guides assume. One case on a related model saw a camera stay permanently on regardless of gear selected, only resolved once a proper 12V-to-6V step-down converter was correctly fitted.
Note too that towbar wiring kits can be confusing to match against factory wiring colours, since generic kit instructions rarely specify which factory wire colour corresponds to which function on your specific car.
Why a reversing knock on the Yaris costs more than it looks
The Toyota Yaris's rear bumper carries more hardware than older cars used to — parking sensors, a reversing camera housing, occasionally exhaust trim finishers — which is exactly why even a minor kerb knock can mean more than just ordering a replacement panel.
Watch: replacing itThe sequence is much the same on this generation: wheel-arch liner screws, the fixings along the boot aperture and under the lower edge, then unclip each corner from the wing and unplug any sensor loom before the cover comes away.
What sits behind the paint at the back of the Yaris
Beyond absorbing minor impacts, the rear bumper on higher trims of the Yaris often houses parking sensors, a reversing camera, and sometimes integrated exhaust finishers. A bumper that looks compatible can still be missing the correct cutouts or wiring provisions for your specific trim's equipment.
Generations, Derivatives and Colour| Standard Yaris (2020–present), all trims | Pure White, Decuma Grey, Eclipse Black, Nebula Blue, Scarlet Flare |
|---|---|
| GR Yaris (2020–present) | Deliberately limited to just four shades: Pure White, Precious Black, Scarlet Flare, and Platinum White Pearl — narrower than the standard range; the rear bumper is also styled differently on this trim |
Opens live listings in a new tab.
These are the same regardless of make or model — see our full Rear Bumper Guide for common damage types, confirming fitment (body style and sensor equipment matter here), and OEM vs aftermarket guidance.
The same part on other modelsThe same part, covered across other Toyota models.