Car Parts Guide
BRAKE PADS Toyota Prius · PARTS GUIDE

Toyota Prius Brake Pads: Specs, Fitment & Wear Symptoms

On the Prius, a documented technical bulletin covers pad material delaminating after prolonged wet parking.

Toyota Prius (2016 ON) brake pads, OEM 0446547060, aftermarket Brembo P 83 106 Illustration for editorial purposes
Find Toyota Prius Brake Pads Here!

Opens live listings in a new tab.

OEM Part Number: 0446547060 (as quoted in catalogue listings — confirm via VIN) — aftermarket front pads Brembo P 83 106 / Bosch 0 986 494 670

Accuracy note: Covers the Toyota Prius (2016-) as listed in the UK aftermarket catalogues. Front brake pads are sold by caliper system (ATE / Teves, TRW / Lucas, Bosch, Akebono, Brembo etc.) and by pad size, and one model usually has two or three pad sizes depending on engine, brake size and trim — a wrong size will not fit the caliper. The references below are UK aftermarket catalogue listings for this generation, labelled by brand with their width x height x thickness in mm; genuine numbers are shown only where a listing quotes one. Measure the old pad or check the caliper system against your VIN before ordering, and fit a new wear sensor where the set is only 'prepared for' one.
Front brake pads (aftermarket)Brembo P 83 106 (123 x 50 x 16 mm, no wear contact, Akebono system, anti-squeak plate); Bosch 0 986 494 670 (122.7 x 49.6 x 15.5 mm, accessory 1987474468); ATE 13.0460-5617.2 (122.7 x 49.6 x 15.6 mm, not prepared for a wear indicator); TRW GDB4173 (122.7 x 49.6 x 15.5 mm, not prepared for a wear indicator, Akebono); Textar 2445101 (122.8 x 49.6 x 15.6 mm, not prepared for a wear indicator, Akebono); Ridex 402B0465 (122.7 x 49.8 x 17.5 mm, no wear contact, labelled front).
Pad sizes & variantsOne front size of about 123 x 50 mm in 15.5 to 17.5 mm thickness.
Genuine (OE) numbers quoted0446547060 (Ashika 50-02-219, 123 x 49.3 mm, Akebono).
Fitment notesNo front set has a wear sensor; the pads are not prepared for one. Only the Ridex set is explicitly labelled front; the other sizes match the front axle.

What a clonk on pulling away means on the Prius

If you experience a clonk when first moving off after the car has sat parked and wet for several days, followed by a pulsing sensation through the brake pedal, a documented Technical Service Bulletin covers exactly this fault, where a section of brake pad material can delaminate and fall away from the backing plate after prolonged wet standing. This is a recognised issue with an associated warranty repair path — worth mentioning this specific symptom pattern directly to your dealer.

Regenerative braking means the electric motor handles a significant portion of everyday deceleration, considerably reducing wear on the physical friction brakes compared with a conventional petrol equivalent. It's not unusual for hybrid brake pads to still have plenty of life remaining at mileages where a conventional car's pads would be due replacement.

Note too that a squeal appearing after washing the car is commonly just light surface corrosion on the discs rather than a fault — a firm brake application or two typically clears it.

One of the few truly universal parts

Every version of the Prius uses brake pads that wear down through normal use — the only real variable is how quickly, which depends on engine, trim, and (where fitted) whether the car has any form of regenerative braking to ease the load.

Before you buy: pad size and compound vary by engine and trim. Always confirm against your VIN before ordering.
Watch: replacing them

🎬 Watch: HOW TO CHANGE FRONT BRAKE PADS AND ROTORS ON A 2016 - 2022 TOYOTA PRIUS XLE

Watch on YouTube ↗

Covers the 2016-on generation, pads and rotors.

Toyota Prius Brake Pads reference plate

How friction at the pads stops the Prius

Brake pads clamp against the discs to convert the car's momentum into heat, slowing it down. On any version of the Prius with hybrid assistance or regenerative braking, this system handles a meaningful share of everyday slowing, which can extend pad life compared with a purely petrol or diesel equivalent.

Sizes of pad fitted across the Prius range

2010-2015, front pad, genuine referenceSized to match the 255mm disc/caliper on this tier. Pad size scales with engine output and trim on this model, not just the disc diameter — always confirm the exact pad against your VIN rather than assuming from generation alone.
2010-2015, front brake pads, genuine referenceA different pad from the standard tier — confirm fitment via VIN before ordering.
2011-2013, rear brake pads, genuine referenceConfirm exact fitment via VIN — pad size on this model varies by engine and trim, not just by generation.
2010-2015, rear pads, dimensionsa different, larger pad to match the 259mm disc/caliper on this higher tier — not interchangeable with the standard-tier pad on the same axle.
Find Toyota Prius Brake Pads Here!

Opens live listings in a new tab.

Wear symptoms, DIY difficulty and aftermarket advice

These are the same regardless of make or model — see our full Brake Pads Guide for warning signs to watch for, confirming fitment against your VIN, and R90-certified aftermarket brands worth trusting.

The same part on other models

The same part, covered across other Toyota models.