Toyota Verso Brake Pads: Specs, Fitment & Wear Symptoms

On the Verso, a genuine, documented technical bulletin covers pad material delaminating after prolonged wet parking.

Illustration for editorial purposes

Opens live listings in a new tab.

OEM Part Number: 04465-02190 (as quoted in catalogue listings — confirm via VIN) — aftermarket front pads Brembo P 83 109 / Bosch 0 986 494 187

Accuracy note: Covers the Toyota Verso (2009-2018) as listed in the UK aftermarket catalogues. Front brake pads are sold by caliper system (ATE / Teves, TRW / Lucas, Bosch, Akebono, Brembo etc.) and by pad size, and one model usually has two or three pad sizes depending on engine, brake size and trim — a wrong size will not fit the caliper. The references below are UK aftermarket catalogue listings for this generation, labelled by brand with their width x height x thickness in mm; genuine numbers are shown only where a listing quotes one. Measure the old pad or check the caliper system against your VIN before ordering, and fit a new wear sensor where the set is only 'prepared for' one.

Front brake pads (aftermarket)	Brembo P 83 109 (151 x 65 x 19 mm, wear sensor no - acoustic, Bosch caliper, with piston clip and anti-squeak plate); Bosch 0 986 494 187 (151.1 x 65.3/62.5 x 19.3 mm, wear sensor no - acoustic, Bosch caliper, accessory kits 1987474468 and 1987474311); TRW GDB3479 (151 x 62.5/65.4 x 19/19.4 mm, wear sensor no - acoustic, Bosch caliper, directional); ATE 13.0460-5603.2 (150.7/150.6 x 62.5/65.3 x 19.2 mm, wear sensor no - acoustic, Bosch caliper); Valeo 302125 (151 x 66/63 x 19 mm, integrated wear sensor yes, Bosch caliper); Ferodo FDB1890 (150.2/151.4 x 60.9 x 17.4 mm, wear sensor no - acoustic, ATE caliper, the smaller pad shared with the Yaris and Auris).
Pad sizes & variants	Two front sizes appear. The main Verso size is about 151 x 65 mm x 19 mm thick on Bosch calipers (WVA 24204 / 24668 family). A smaller 151 x 61 mm pad (Brembo P 83 148, Bosch 0 986 494 682, WVA 24946 / 25006) is also listed, and a 147 x 57 x 17 mm pad (Blue Print ADT342162, febi 170237) appears without an axle stated.
Genuine (OE) numbers quoted	04465-02190 (quoted against Ashika 50-02-244, matching the 151 x 65 mm Bosch-caliper size); none quoted against the main-brand references.
Fitment notes	Most Versos use the 151 x 65 mm Bosch-caliper pad with acoustic wear indicators only; no electrical wear-sensor lead is needed. Check the pad height (65 mm against 61 mm) on the old set before ordering, as both sizes are listed for the model.

A Genuine, Documented Technical Bulletin Worth Knowing About — Toyota Verso Brake Pads

If you experience a clonk when first moving off after the car has sat parked and wet for several days, followed by a pulsing sensation through the brake pedal, this is genuinely worth knowing: a documented Technical Service Bulletin covers exactly this fault, where a section of brake pad material can delaminate and fall away from the backing plate after prolonged wet standing. This is a genuine, recognised issue with an associated warranty repair path — worth mentioning this specific symptom pattern directly to your dealer.

Worth knowing if your car is a hybrid: regenerative braking means the electric motor handles a significant portion of everyday deceleration, considerably reducing wear on the physical friction brakes compared with a conventional petrol equivalent. It's genuinely not unusual for hybrid brake pads to still have plenty of life remaining at mileages where a conventional car's pads would be due replacement.

It's also worth knowing that a squeal appearing specifically after washing the car is commonly just light surface corrosion on the discs rather than a genuine fault — a firm brake application or two typically clears it.

Toyota Verso Brake Pads: Brake Pads Are One of the Few Truly Universal Parts

Every version of the Verso uses brake pads that wear down through normal use — the only real variable is how quickly, which depends on engine, trim, and (where fitted) whether the car has any form of regenerative braking to ease the load.

Before you buy: pad size and compound vary by engine and trim. Always confirm against your VIN before ordering.

Toyota Verso Brake Pads: Watch: Replacing It

🎬 Watch: Toyota Verso Brake Pads Change Job

Watch on YouTube ↗

Titled Verso; generation not confirmed from the title. Fallback (older gen): oK6El9P8QN4 Corolla Verso 2.

Toyota Verso Brake Pads: What They Do

Brake pads clamp against the discs to convert the car's momentum into heat, slowing it down. On any version of the Verso with hybrid assistance or regenerative braking, this system handles a meaningful share of everyday slowing, which can genuinely extend pad life compared with a purely petrol or diesel equivalent.

Common Sizes

Corolla Verso, front pad, genuine reference	Sized to match the 275mm disc/caliper on this tier. Pad size genuinely scales with engine output and trim on this model, not just the disc diameter — always confirm the exact pad against your VIN rather than assuming from generation alone.
Verso (AR2, 2009 onwards), front pads	Genuinely a different, larger pad to match the 295mm disc/caliper on this higher tier — not interchangeable with the standard-tier pad on the same axle.
Verso (AR2), rear pads	Sized to match the 297mm disc/caliper on this tier. Pad size genuinely scales with engine output and trim on this model, not just the disc diameter — always confirm the exact pad against your VIN rather than assuming from generation alone.

Find Toyota Verso Brake Pads Here!

Opens live listings in a new tab.

Toyota Verso Brake Pads: Wear Symptoms, DIY Difficulty & Aftermarket Advice

These are the same regardless of make or model — see our full Brake Pads Guide for warning signs to watch for, confirming fitment against your VIN, and R90-certified aftermarket brands worth trusting.

More Toyota Brake Pads

The same part, covered across other Toyota models.