Car Parts Guide
FRONT BUMPER Volvo S60 · PARTS GUIDE

Volvo S60 Front Bumper: Fitment, Sensors & Common Damage

On the S60, replacing three parking sensors yourself costs under £60 — plus a finding where a dealer quoted four hours' labour that the official procedure says isn't needed.

Volvo S60 (2010-2018) front bumper, primed, aftermarket Prasco VV5161011 Illustration for editorial purposes
Find Volvo S60 Front Bumper Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN

Aftermarket covers: Prasco VV5161011 / Van Wezel 5935576

Accuracy note: Covers the Volvo S60 (2010-2018) as listed in the UK aftermarket catalogues. A front bumper is a body-coloured plastic skin, so what you buy is a primed cover that still needs painting to your paint code, and the right one depends on body style, trim, facelift date and the holes moulded into it for parking sensors, fog lights, headlamp washers or a tow eye cover. A cover without the right holes cannot be drilled accurately at home. The references below are UK aftermarket catalogue listings for this generation, labelled by brand with the fitment details the catalogue gives; carmakers rarely publish the genuine number against these, so order a genuine cover against your VIN if you want a guaranteed match. The splitters, outer sections and trims listed separately are the parts most often sold on their own after a car-park knock.
Front bumper covers (aftermarket)Prasco VV5161011 (primed); Prasco VV5161001 (primed); Van Wezel 5935576 (primed, with parking sensor holes, with tow eye cover hole); Van Wezel 5935574 (primed, with headlamp washer holes, with tow eye cover hole); Diederichs 7662051 (primed, with headlamp washer holes)
Splitters, outer sections & trimsNone listed separately
Genuine (OE) numbers quotedNone quoted in the catalogue listings — the genuine cover varies by body style, trim, parking sensors and fog lights, so order it against your VIN
Fitment notesMatch body style, trim, facelift date and the holes for parking sensors, fog lights and washer jets; covers come primed and need painting to your paint code before fitting.

Why repairs to the S60's nose add up quickly

The Volvo S60's front bumper typically carries more than styling — parking sensors, adaptive cruise radar, and fog light housings are all commonly built in, so even a minor impact can mean more than a simple panel swap.

Before you buy: bumper specification varies significantly by trim, particularly around parking sensor cutouts, radar mounting points and fog light provisions. Always confirm against your VIN before ordering.

Crash absorbers, reinforcement and the S60's front cover

Beyond absorbing minor impacts, the front bumper on higher trims of the S60 often houses parking sensors, the radar sensor used for adaptive cruise control, and fog lights. A bumper that looks compatible can still be missing the correct cutouts or mounting provisions for your specific trim's equipment.

Watch: replacing it

🎬 Watch: Volvo S60 V60 Front Bumper Removal

Watch on YouTube ↗
Volvo S60 Front Bumper reference plate
Generations, Derivatives and Colour
Standard trimsCrystal White, Onyx Black, Denim Blue, Fusion Red
Recharge Black Editionrestricted to Onyx Black only — no other colour is offered on this specific plug-in hybrid trim
Find Volvo S60 Front Bumper Here!

Opens live listings in a new tab.

A cheaper route for a sensor fault on the S60

If a parking sensor fault is quoted at a significant labour cost, one documented UK case saw an owner replace three sensors themselves for under £60 in total, using a special nylon tool to ease the bumper away from the bodywork without scratching the paint. The sensors themselves typically cost around £20 each — it's the dealer's labour charge that tends to make this job feel expensive.

One case saw a dealer quote four hours of labour to replace a single sensor, claiming the bumper and wiring harness needed to be removed — yet according to the official repair procedure for this exact job, the bumper does not need to come off at all.

With the ignition on and the car in reverse, a healthy sensor should emit a faint, rapid clicking sound as it sends out ultrasonic pulses. A silent sensor is likely the genuine source of a fault.

Common damage, DIY difficulty and aftermarket advice

These are the same regardless of make or model — see our full Front Bumper Guide for common damage types to check for, confirming fitment against your VIN, and the sensor-calibration risk with cheap aftermarket covers.

The same part on other models

The same part, covered across other Volvo models.