Car Parts Guide
FRONT BUMPER Volvo XC60 · PARTS GUIDE

Volvo XC60 Front Bumper: Fitment, Sensors & Common Damage

Replacing three parking sensors yourself costs under £60 in total — plus a finding where a dealer quoted four hours' labour claiming the bumper needed removal, when the official procedure says it doesn't.

Volvo XC60 (MK1 2008-2017) front bumper, primed, tow eye cover hole, aftermarket Van Wezel 5923574 Illustration for editorial purposes
Find Volvo XC60 Front Bumper Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN

Aftermarket covers: Van Wezel 5923574 / Diederichs 7675050

Accuracy note: Covers the Volvo XC60 (Mk1 2008-2017) as listed in the UK aftermarket catalogues. A front bumper is a body-coloured plastic skin, so what you buy is a primed cover that still needs painting to your paint code, and the right one depends on body style, trim, facelift date and the holes moulded into it for parking sensors, fog lights, headlamp washers or a tow eye cover. A cover without the right holes cannot be drilled accurately at home. The references below are UK aftermarket catalogue listings for this generation, labelled by brand with the fitment details the catalogue gives; carmakers rarely publish the genuine number against these, so order a genuine cover against your VIN if you want a guaranteed match. The splitters, outer sections and trims listed separately are the parts most often sold on their own after a car-park knock.
Front bumper covers (aftermarket)Van Wezel 5923574 (primed, with tow eye cover hole); Diederichs 7675050 (primed); Blic 5510-00-9057900P (from 05.2008 to 12.2012); Klokkerholm 9057900 (with fog light holes); Equal Quality P5689 (primed)
Splitters, outer sections & trimsPrasco VV6101011 (primed, with headlamp washer holes, centre section)
Genuine (OE) numbers quotedNone quoted in the catalogue listings — the genuine cover varies by body style, trim, parking sensors and fog lights, so order it against your VIN
Fitment notesMatch body style, trim, facelift date and the holes for parking sensors, fog lights and washer jets; covers come primed and need painting to your paint code before fitting.

More than plastic: what a front-end repair involves on the XC60

The Volvo XC60's front bumper routinely integrates parking sensors, adaptive cruise control radar, and fog light housings, which means replacing it after even minor impact damage often involves more than a straightforward swap.

Before you buy: bumper specification varies significantly by trim, particularly around parking sensor cutouts, radar mounting points and fog light provisions. Always confirm against your VIN before ordering.

The front-end structure of the XC60, explained

Beyond absorbing minor impacts, the front bumper on higher trims of the XC60 often houses parking sensors, the radar sensor used for adaptive cruise control, and fog lights. A bumper that looks compatible can still be missing the correct cutouts or mounting provisions for your specific trim's equipment.

Watch: replacing it

🎬 Watch: How to Replace Front Bumper Cover 2009-2017 Volvo XC60

Watch on YouTube ↗
Volvo XC60 Front Bumper reference plate
Generations, Derivatives and Colour
All generations, standard trimsOnyx Black, Crystal White, Vapour Grey, Mulberry Red
Crystal White (pearlescent option)Deliberately restricted to Plus and Ultimate trims — unavailable on Core-spec cars at any price, unusual for a manufacturer's flagship white
R-Design/Denim BlueDenim Blue originally debuted on the sportier R-Design trim before becoming available more widely
Find Volvo XC60 Front Bumper Here!

Opens live listings in a new tab.

What sensors cost at the dealer, and the alternatives

If a parking sensor fault is quoted at a significant labour cost, one documented UK case saw an owner replace three sensors themselves — one for the front, one for the rear, and a spare — for under £60 in total, once they understood the process, using a special nylon tool to ease the bumper away from the bodywork without scratching the paint. The sensors themselves typically cost around £20 each; it's the dealer's labour charge that tends to make this job feel expensive — check this before assuming a straightforward sensor swap needs to cost hundreds of pounds.

One case saw a dealer quote four hours of labour to replace a single sensor, claiming the bumper and wiring harness needed to be removed — yet according to the official repair procedure for this exact job, the bumper does not need to come off at all. It's worth asking a dealer directly to justify a lengthy labour quote for what should be a comparatively simple sensor replacement, particularly if it sounds disproportionate to the actual physical work involved.

With the ignition on and the car in reverse, getting close to each sensor should reveal a faint, rapid clicking or ticking sound as it sends out ultrasonic pulses, sometimes felt as a slight vibration with a fingertip. A silent sensor is likely the genuine source of a fault, worth checking each one individually this way before assuming a more complex wiring or module issue.

Common damage, DIY difficulty and aftermarket advice

These are the same regardless of make or model — see our full Front Bumper Guide for common damage types to check for, confirming fitment against your VIN, and the sensor-calibration risk with cheap aftermarket covers.

The same part on other models

The same part, covered across other Volvo models.