Volkswagen Sharan Rear Bumper: Fitment, Sensors & Common Damage
On the Sharan, some cars have genuine reversing camera hardware fitted but never activated at the factory — confirmed by a case where wiring existed but coding never happened.
Opens live listings in a new tab.
OEM Part Number: confirm via VIN
Aftermarket covers: Prasco VG1011051 / Van Wezel 5776544
| Rear bumper covers (aftermarket) | Prasco VG1011051 (Rear, Colour: black, with holes for park assist); Van Wezel 5776544 (Rear, primed, without holes for parking sensors); Van Wezel 5776545 (Rear, primed, with holes for parking sensors); Blic 5510-00-9591950P (Rear, from 05.2010, to 05.2015); Blic 5510-00-9591951P (Rear, with holes for parking sensors, from 05.2010, to 05.2015); Klokkerholm 9591950 (Rear, with holes for parking sensors) |
|---|---|
| Lower sections, corners & trims | None listed separately |
| Genuine (OE) numbers quoted | None quoted in the catalogue listings — the genuine cover varies by body style, parking sensors and tow bar, so order it against your VIN |
| Fitment notes | Match body style, facelift date and the holes for parking sensors or exhaust trims; covers come primed and need painting to your paint code before fitting. |
Activating a dormant camera on the Sharan
A distinctive, documented pattern — check this before assuming a reversing camera fault: some cars are built with the physical camera hardware and wiring present — including in one case the washer pipe for the camera lens connected and everything — but the camera was simply never activated or coded at the factory, meaning it's physically there but functionally inert. This is worth checking before paying for expensive diagnostics on a camera you'd otherwise assume has failed; activation on a genuinely-fitted-but-uncoded camera typically requires VAG-specific tooling (ODIS or equivalent) to add the module into the car's gateway list and complete a proper calibration, which most independent VAG specialists (not just main dealers) can do.
If you're having a towbar fitted, the trailer control module does more than provide power to the socket — it automatically disables the rear parking sensors and rear fog lights, and adjusts ABS/traction control logic, when it detects a trailer plugged in. Never allow a fitter to simply splice the tow socket's lighting directly into the existing wiring rather than using a proper module — doing so bypasses this logic entirely and can cause both the car's own systems and the trailer's lights to behave unpredictably.
Sensors, cameras and brackets: what sits in the Sharan's tail
Kerb damage to the Volkswagen Sharan's rear bumper is common, but the repair often isn't as simple as it looks: it houses parking sensors, a reversing camera, and sometimes exhaust trim finishers, all of which complicate what would otherwise be a straightforward panel replacement.
Watch: replacing itThe sequence is much the same on this generation: wheel-arch liner screws, the fixings along the boot aperture and under the lower edge, then unclip each corner from the wing and unplug any sensor loom before the cover comes away.
The job the back panel does
Beyond absorbing minor impacts, the rear bumper on higher trims of the Sharan often houses parking sensors, a reversing camera, and sometimes integrated exhaust finishers. A bumper that looks compatible can still be missing the correct cutouts or wiring provisions for your specific trim's equipment.
Generations and Colour| All generations | Pure White, Deep Black Pearl, Reflex Silver, Tungsten Silver |
|---|---|
| Naming note | "Sharan" is a made-up word according to Volkswagen, coined the same way as "Touran" — not derived from a real Persian word as sometimes claimed |
Opens live listings in a new tab.
These are the same regardless of make or model — see our full Rear Bumper Guide for common damage types, confirming fitment (body style and sensor equipment matter here), and OEM vs aftermarket guidance.
The same part on other modelsThe same part, covered across other Volkswagen models.