Volkswagen Up! Rear Bumper: Fitment, Sensors & Common Damage
On the Up!, some cars have genuine reversing camera hardware fitted but never activated at the factory — confirmed by a case where wiring existed but coding never happened.
Opens live listings in a new tab.
OEM Part Number: confirm via VIN
Aftermarket covers: Van Wezel 5702545 / Van Wezel 5702544
| Rear bumper covers (aftermarket) | Van Wezel 5702545 (Rear, primed, with holes for parking sensors); Van Wezel 5702544 (Rear, for vehicles with or without parking sensors, primed, Smooth); Diederichs 2236155 (Rear, primed); Diederichs 2236156 (Rear, for vehicles with parking sensors, primed); Blic 5506-00-9517950P (Rear, without holes for parking sensors, from 07.2016); Blic 5506-00-9517951P (Rear, from 07.2016) |
|---|---|
| Lower sections, corners & trims | None listed separately |
| Genuine (OE) numbers quoted | None quoted in the catalogue listings — the genuine cover varies by body style, parking sensors and tow bar, so order it against your VIN |
| Fitment notes | Match body style, facelift date and the holes for parking sensors or exhaust trims; covers come primed and need painting to your paint code before fitting. |
Why the Up! may have a camera it doesn't use
A distinctive, documented pattern — check this before assuming a reversing camera fault: some cars are built with the physical camera hardware and wiring present — including in one case the washer pipe for the camera lens connected and everything — but the camera was simply never activated or coded at the factory, meaning it's physically there but functionally inert. This is worth checking before paying for expensive diagnostics on a camera you'd otherwise assume has failed; activation on a genuinely-fitted-but-uncoded camera typically requires VAG-specific tooling (ODIS or equivalent) to add the module into the car's gateway list and complete a proper calibration, which most independent VAG specialists (not just main dealers) can do.
If you're having a towbar fitted, the trailer control module does more than provide power to the socket — it automatically disables the rear parking sensors and rear fog lights, and adjusts ABS/traction control logic, when it detects a trailer plugged in. Never allow a fitter to simply splice the tow socket's lighting directly into the existing wiring rather than using a proper module — doing so bypasses this logic entirely and can cause both the car's own systems and the trailer's lights to behave unpredictably.
Why a reversing knock on the Up! costs more than it looks
The Volkswagen Up!'s rear bumper carries more hardware than older cars used to — parking sensors, a reversing camera housing, occasionally exhaust trim finishers — which is exactly why even a minor kerb knock can mean more than just ordering a replacement panel.
Watch: replacing itClean match.
What sits behind the paint at the back of the Up!
Beyond absorbing minor impacts, the rear bumper on higher trims of the Up! often houses parking sensors, a reversing camera, and sometimes integrated exhaust finishers. A bumper that looks compatible can still be missing the correct cutouts or wiring provisions for your specific trim's equipment.
Generations and Colour| All generations | Pure White, Tornado Red, Wild Cherry Red, Chili Orange |
|---|
Opens live listings in a new tab.
These are the same regardless of make or model — see our full Rear Bumper Guide for common damage types, confirming fitment (body style and sensor equipment matter here), and OEM vs aftermarket guidance.
The same part on other modelsThe same part, covered across other Volkswagen models.