Parts Guide
REAR SHOCK ABSORBER Audi Q3 · PARTS GUIDE

Audi Q3 Rear Shock Absorber: Specs, Fitment & Common Faults

Genuinely worth confirming first: which rear axle your Q3 has, since it determines a completely different shock absorber.

Illustration of a rear shock absorber and coil spring Illustration for editorial purposes

Confirmed: Torsion Beam and Multi-Link Need Completely Different Rear Dampers

Genuinely important to establish before ordering: VW Group's MQB-based cars use one of two different rear axle designs depending on engine and trim, and each requires a different rear shock absorber. Standard Q3s with smaller petrol or diesel engines use a torsion beam (twist beam) rear axle. Higher-output and performance variants use a multi-link rear axle instead — and critically, any 4Motion/4Drive/Quattro (four-wheel-drive) variant mandatorily has multi-link regardless of engine, since a torsion beam leaves no room for a rear differential and driveshaft to pass through. If you're unsure which your car has, look underneath the rear of the car: a single, solid connecting beam is torsion beam; separate arms at each wheel is multi-link.

A further genuinely important distinction: cars fitted with adaptive electronic damping use a completely different rear shock absorber with a built-in electrical connector — confirmed directly in VW Group's own workshop documentation. Standard, non-adaptive shocks are not interchangeable with adaptive shocks in either direction.

The Part That Takes Every Bump Before You Feel It

Front suspension tends to get most of the attention since it also handles steering, but the rear shock absorbers wear too — often more subtly, with symptoms that are easy to write off as road noise until they get worse.

Before you buy: rear axle type (torsion beam or multi-link), adaptive damping, and left/right side all affect fitment. Always confirm against your VIN before ordering.
Audi Q3 Rear Shock Absorber reference plate

OEM Part Numbers

Accuracy note: genuinely worth knowing: left and right rear shocks are separate, non-mirror-image part numbers on the Q3, not a single part fitted either side — confirm which side you need before ordering.
Torsion beam axle, rightGenuinely a different reference from the left-side shock — VW Group does not sell these as a single interchangeable part for either side
Torsion beam axle, leftA genuinely different part number from the right-side shock above
Multi-link axle (higher-output/4Motion variants)Genuinely a different shock from the torsion beam version — confirmed by VW Group's own workshop documentation as requiring a completely different rear damper, not a stiffer version of the same part
Adaptive damping shock, where fittedA genuinely different construction from a non-adaptive shock, with a built-in electrical connector — not interchangeable with a standard shock in either direction, and fitting the wrong type will trigger a persistent dashboard warning

Cars fitted with a vehicle level sender (part of some self-levelling or headlight self-levelling setups) have an additional linkage arm connected near the shock absorber — genuinely worth noting when removing or replacing the shock, since this arm needs to be disconnected first, but it's a separate part from the shock itself.

What It Does

The rear shock absorber controls how quickly the rear suspension compresses and rebounds over bumps, working independently of the coil spring on most modern rear axles. A worn rear shock lets the back of the car bounce excessively after a bump instead of settling quickly, and can accelerate uneven rear tyre wear if left unaddressed.

Shop for This Part on eBay

2x Rear Strut Shock Absorber for Audi TT/Q3 Sportback VW GOLF VII VIII PASSAT 2x Rear Strut Shock Absorber for Audi TT/Q3 Sportback VW GOLF VII VIII PASSAT GBP 56.95 FOR AUDI Q3 2.0 TDI quattro 2012-2018 REAR SHOCK ABSORBERS SHOCKS SHOCKERS X2 FOR AUDI Q3 2.0 TDI quattro 2012-2018 REAR SHOCK ABSORBERS SHOCKS SHOCKERS X2 GBP 59.95 2x Rear Shock Absorber (Pair) For Audi Q3 8UB 2011-2018 5N0513049AG Tapy 2x Rear Shock Absorber (Pair) For Audi Q3 8UB 2011-2018 5N0513049AG Tapy GBP 67.26 2x Rear Shock Absorber (Pair) For Audi Q3 (F3B, F3N) 2018-On 8S0513029 Tapy 2x Rear Shock Absorber (Pair) For Audi Q3 (F3B, F3N) 2018-On 8S0513029 Tapy GBP 62.03 Shock Absorber Right Rear Left Fits Audi Q3 VW Tiguan Van FEBI BILSTEIN 1002354 Shock Absorber Right Rear Left Fits Audi Q3 VW Tiguan Van FEBI BILSTEIN 1002354 GBP 31.94 PAIR REAR SHOCK ABSORBER DUST COVER BUMP STOP SET FOR VW GOLF PASSAT AUDI A4 Q3 PAIR REAR SHOCK ABSORBER DUST COVER BUMP STOP SET FOR VW GOLF PASSAT AUDI A4 Q3 GBP 8.00 For Audi Q3 Rear Shock Absorbers Absorber Shocks x2 F3B, F3N Sportback 2018 on For Audi Q3 Rear Shock Absorbers Absorber Shocks x2 F3B, F3N Sportback 2018 on GBP 50.37 For Audi Q3 Quattro Rear Shock Absorbers Absorber Shocks Pair F3B, F3N Sportback For Audi Q3 Quattro Rear Shock Absorbers Absorber Shocks Pair F3B, F3N Sportback GBP 50.34

As an eBay Partner, Car United may earn commission from qualifying purchases shown above. Listings and pricing are pulled live from eBay and may vary.

Warning Signs, DIY Difficulty & Aftermarket Advice

These are the same regardless of make or model — see our full Rear Shock Absorber Guide for symptoms of a worn shock, confirming fitment against your VIN, and OEM vs aftermarket guidance.

More Audi Rear Shock Absorber

The same part, covered across other Audi models.