Hyundai ix35 Fuel Pump: Specs, Fitment & Common Faults
On the ix35, Hyundai has issued multiple genuine fuel pump recalls across various models — worth checking your specific VIN directly.
Opens live listings in a new tab.
OEM Part Number: confirm via VIN
Aftermarket units: Bosch 0 580 454 094 / Hüco 133283
| Fuel pumps / feed units (aftermarket) | Hüco 133283 (complete fuel feed unit, diesel, with sender); Delphi FG2482-12B1 (complete fuel pump module, 310 x 115.5 x 134 mm, 1.1 kg, without pressure sensor, without seal); Bosch 0 580 454 094 (bare in-tank pump); Magneti Marelli 313011313222 (fuel supply module); Ridex 458F0069 (bare diesel pump, 3.2 bar / 130 l/h, 2 connectors, 43 mm); Ridex 458F13718 (in-tank pump, petrol, 3.8 bar, 185 x 60 mm); Meat & Doria 76416 (bare pump, 3 bar / 95 l/h); ERA-pattern Engitech ENT100053 (bare pump, 4 bar / 125 l/h, 2 connectors, 54.5 mm, 188 mm). |
|---|---|
| Types & variants | the 1.6 GDi and 2.0 petrol take a 3 to 3.8 bar bare pump or the Delphi FG2482-12B1 module. |
| Genuine (OE) numbers quoted | 8450008680 (Kamoka 8410005); 170429F500 (Meat & Doria 76416); 8941674933 (Meat & Doria 76041, a 0.1 bar carburettor pump that does not suit this car). The gasket OE numbers 22442-2GGB0 and 22442-2G700 belong to seals, not pumps. |
| Fitment notes | Choose petrol or diesel first; the diesel module is a lift pump with sender and the petrol unit runs at higher pressure. Bare pumps (Ridex, Bosch, Meat & Doria) go into the original housing and keep the sender; the Hüco and Delphi modules replace the whole unit. The Delphi module is supplied without a seal, so order the tank ring separately. |
Recalls to check on the ix35's fuel system
Hyundai has issued multiple confirmed fuel pump recalls across various models and years, including issues with both the low-pressure in-tank pump and, on some turbocharged models, the high-pressure pump connection not being properly torqued during assembly — creating a genuine fuel leak and fire risk in the affected cases. It's worth checking your specific VIN against Hyundai's official recall checker directly, particularly on a used car where you can't be certain a previous owner had any relevant recall work completed.
Also, the documented symptoms worth watching for: engine hesitation or a "bucking" feeling during acceleration, noticeably longer crank times when starting, and difficulty accelerating under load such as merging or climbing hills — worth having these looked at promptly if you notice them, rather than waiting for a complete failure.
Why a sudden non-start on the ix35 often means the pump
This is one of the more inconveniently timed failures the Hyundai ix35 can have — it tends to strand drivers mid-journey rather than politely failing while the car's parked on the drive. Recognising the early warning signs buys real time to sort it before you're stuck somewhere inconvenient.
Watch: replacing itPump and level sender, LM 2010-2015
Delivering fuel from the tank to the engine at the correct pressure for combustion is the Hyundai ix35's fuel pump's whole job. It lives inside the tank itself, submerged in fuel, which is exactly why replacing something this small is a more involved job than it looks.
In-tank and high-pressure pumps across the ix35 range
| LM/EL/ELH (2010–2015), all petrol & diesel | Spans both diesel (in-tank lift pump plus an engine-mounted high-pressure pump) and petrol (in-tank low-pressure pump, plus a separate high-pressure pump if direct-injection) variants — confirm your exact engine before ordering |
|---|
Opens live listings in a new tab.
These are the same regardless of make or model — see our full Fuel Pump Guide for symptoms to watch for (including the low-pressure vs high-pressure distinction on direct-injection engines), confirming fitment against your VIN, and OE suppliers worth knowing.
The same part on other modelsThe same part, covered across other Hyundai models.