Car Parts Guide
BRAKE DISCS Suzuki Ignis · PARTS GUIDE

Suzuki Ignis Brake Discs: Specs, Fitment & Wear Symptoms

On the Ignis, Suzuki has issued confirmed safety recalls relating to braking systems across its small car range — worth checking your specific VIN.

Suzuki Ignis (2017 ON) brake discs, 231 x 20 mm, OEM 55311M66R00, aftermarket Zimmermann 540.5314.20 Illustration for editorial purposes
Find Suzuki Ignis Brake Discs Here!

Opens live listings in a new tab.

OEM Part Number: 55311M66R00

Genuine front disc, confirm via VIN. Aftermarket front discs: Zimmermann 540.5314.20

Accuracy note: Covers the Suzuki Ignis (2017-) as listed in the UK aftermarket catalogues. Front brake discs are sold by diameter and thickness, and most models have two or three disc sizes depending on engine, brake size and trim — a 278 mm disc will not fit a car built with 300 mm brakes, so the caliper carrier and the disc must match. The references below are UK aftermarket catalogue listings for this generation, labelled by brand with diameter x thickness in mm; genuine numbers are shown only where a listing quotes one. Measure the old disc or check the brake size against your VIN before ordering, replace discs in pairs with new pads, and scrap any disc at or below its minimum thickness.
Front brake discs (aftermarket)Zimmermann 540.5314.20 (231 x 20 mm, vented, 4 holes, coated, min 18 mm, ECE R90); febi 108628 (231 x 20 mm, vented, 4 holes, coated, min 18 mm); SWAG 33 10 5440 (231 x 20 mm, vented, 4 holes, coated, min 18 mm); Blue Print ADK84348 (231 x 20 mm, vented, 4 holes, coated, min 18 mm); FTE 9082814 (231 x 20 mm, vented, 4 holes, coated, min 18 mm, ECE-R90); Meyle 33-15 521 0025/PD (230 x 20 mm, vented, 4 holes, zinc-flake coated, min 18 mm); febi 108565 (257 x 17 mm, vented, 4 holes, coated, min 15 mm).
Disc sizes & variants231 x 20 mm vented is the standard front disc. A 257 x 17 mm 4-hole front disc (febi 108565, Ridex 82B0345) is also listed
Genuine (OE) numbers quoted55311M66R00 (genuine front disc number for this model — confirm via VIN, as several disc sizes exist)
Fitment notesMinimum thickness 18 mm on the 231 mm disc and 15 mm on the 257 mm disc. All are 4-stud.

How the rotors turn speed into heat on the Ignis

On the Suzuki Ignis, because discs and pads wear as a pair, neglecting one speeds up wear on the other — which explains why a routine pad change so often turns up discs that are further gone than expected.

Before you buy: disc size and design vary by trim, engine size and whether your car has the standard or "sport" brake package. Always confirm against your VIN before ordering.
Watch: replacing them

🎬 Watch: Suzuki Swift Sport Brake discs & Pads replacement (sister (suzuki swift))

Watch on YouTube ↗

Swift shares HEARTECT platform; Swift generation not stated; no Ignis disc video found

Suzuki Ignis Brake Discs reference plate

How the rotors stop the Ignis

Brake discs provide the surface the brake pads clamp against to slow the car, converting momentum into heat through friction. Larger, sportier trims of the Ignis typically use bigger discs than standard versions to handle the additional heat generated by more aggressive braking.

Find Suzuki Ignis Brake Discs Here!

Opens live listings in a new tab.

Why a recall check comes before brake work

Suzuki has issued confirmed safety recalls across its small car range relating to braking systems, including one covering over 20,000 Swift, Baleno, S-Cross and Vitara models built between 2016 and 2022 for a valve between the engine and brake booster that can swell, increasing the pedal effort needed to stop. It's worth checking your specific VIN against Suzuki's official recall register directly, particularly on a used car where you can't be certain a previous owner had any relevant recall work completed.

Surface rust on discs after a period of inactivity is normal and nothing to worry about, but deep pitting or an uneven lip forming on the surface points toward neglected calipers rather than harmless surface corrosion.

Note too that some Suzuki models with strongly front-biased brake balance see their rear discs corrode faster than the fronts simply because the rear brakes see less genuine use in everyday driving — worth bearing in mind if you notice an apparent asymmetry between the front and rear discs.

Wear symptoms, DIY difficulty and aftermarket advice

These are the same regardless of make or model — see our full Brake Discs Guide for warning signs to watch for, confirming fitment against your VIN, and choosing a reliable aftermarket disc.

The same part on other models

The same part, covered across other Suzuki models.