Car Parts Guide
REAR SHOCK ABSORBER Toyota Aygo · PARTS GUIDE

Toyota Aygo Rear Shock Absorber: Specs, Fitment & Common Faults

Confirmed directly in Toyota's own parts catalogue: left and right rear shocks are separate, non-mirror-image references.

Toyota Aygo (2014-2021) rear shock absorber, gas, telescopic, aftermarket Monroe G1075 Illustration for editorial purposes
Find Toyota Aygo Rear Shock Absorber Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN

Aftermarket rear dampers: Monroe G1075 / Meyle 40-267250008

Accuracy note: Covers the Toyota Aygo (2014-2021) as listed in the UK aftermarket catalogues. Rear shock absorbers are replaced as a pair across the axle, because a new damper beside a worn one leaves the car feeling uneven. The right one depends on the engine, the suspension type (standard, sport or heavy-duty, and electronic damping on some models) and sometimes the body style. The references below are UK aftermarket catalogue listings for this generation, labelled by brand with the fitment details the catalogue gives; carmakers rarely publish the genuine number against these, so match a genuine damper against your VIN if you want a guaranteed fit. Toyota's own parts catalogue sometimes distinguishes rear shocks by build location (Japan-built vs local-built) in addition to engine/trim — an extra variable worth checking against your specific VIN.
Rear shock absorbers (aftermarket)Monroe G1075 (gas, telescopic); Meyle 40-267250008 (gas, telescopic); Vaico V22-1275 (gas, telescopic)
Genuine (OE) numbers quotedNone quoted in the catalogue listings — the genuine damper varies by engine, suspension type and body style, so order it against your VIN
Standard trims, righta different part number from the left-side shock — confirm side before ordering
Standard trims, leftA different reference from the right-side shock above
Sport-trim shock, where fittedA different, stiffer shock from standard trims

Even when only one side has visibly failed on the Toyota Aygo, replacing shock absorbers as a pair keeps damping consistent across the axle.

Why the Aygo uses side-specific shocks

Worth knowing: Toyota's own parts catalogue lists left and right rear shock absorbers as distinct, non-interchangeable references — not a single part fitted to either side. Confirm which side you need before ordering.

Why tyre wear and braking suffer when the Aygo's dampers tire

On the Toyota Aygo, steering duties mean the front suspension usually gets checked first, but rear shocks wear out too — just more quietly, with early symptoms that are easy to mistake for ordinary road noise until they get noticeably worse.

Before you buy: engine, trim, and left/right side all affect fitment. Always confirm against your VIN before ordering.
Watch: replacing it

🎬 Watch: How to change rear shock absorbers on TOYOTA AYGO (AB10)

Watch on YouTube ↗

This video is of an earlier generation of the same model; the job is similar but the mounts and fixings can differ slightly.

Toyota Aygo Rear Shock Absorber reference plate

How the dampers stop the Aygo bouncing

Independently of the coil spring, the Toyota Aygo's rear shock absorber governs how fast the rear suspension compresses and rebounds over bumps. Once worn, it lets the back of the car keep bouncing after a bump rather than settling promptly.

Find Toyota Aygo Rear Shock Absorber Here!

Opens live listings in a new tab.

Warning signs, DIY difficulty and aftermarket advice

These are the same regardless of make or model — see our full Rear Shock Absorber Guide for symptoms of a worn shock, confirming fitment against your VIN, and OEM vs aftermarket guidance.

The same part on other models

The same part, covered across other Toyota models.