Toyota Corolla Rear Shock Absorber: Specs, Fitment & Common Faults
Worth knowing: hybrid and non-hybrid versions sometimes share the same rear shock, and sometimes don't — Toyota's own parts catalogue isn't fully consistent across generations.
Opens live listings in a new tab.
OEM Part Number: confirm via VIN
Aftermarket rear dampers: Monroe G1457 / Sachs 319984
| Rear shock absorbers (aftermarket) | Monroe G1457 (gas, telescopic); Sachs 319984 (gas, telescopic); TRW JGT1528S (gas, telescopic, to 09/2019) |
|---|---|
| Genuine (OE) numbers quoted | None quoted in the catalogue listings — the genuine damper varies by engine, suspension type and body style, so order it against your VIN |
| Non-hybrid, right | a different part number from the left-side shock, and potentially from the hybrid version below — confirm side and powertrain before ordering |
| Non-hybrid, left | A different reference from the right-side shock above |
| Hybrid, where distinct from non-hybrid | Confirm via VIN — some generations share references between hybrid and non-hybrid, others use a hybrid-specific part |
On the Toyota Corolla, it's generally worth fitting shock absorbers in pairs rather than one at a time, even if just one side shows obvious signs of failure.
Two sides, two part numbers on the Corolla
Worth knowing: Toyota's own parts catalogue lists left and right rear shock absorbers as distinct, non-interchangeable references — not a single part fitted to either side. Where AWD is offered on this model, AWD and front-wheel-drive versions also use different rear shocks, reflecting the different rear subframe and driveline layout.
What the Corolla feels like with tired dampers at the back
It's easy to focus entirely on the Toyota Corolla's front suspension, since it also does the steering, but the rear shocks age just the same — often with subtler symptoms that get dismissed as road noise right up until they can't be ignored.
This is a general walkthrough for the job rather than one for your exact model, so access and fixings can differ on your car.
How the dampers stop the Corolla bouncing
On the Toyota Corolla, controlling the speed of rear suspension compression and rebound over bumps is the shock absorber's job, working separately from the coil spring. A worn one means the back end bounces longer than it should after a bump.
Opens live listings in a new tab.
These are the same regardless of make or model — see our full Rear Shock Absorber Guide for symptoms of a worn shock, confirming fitment against your VIN, and OEM vs aftermarket guidance.
The same part on other modelsThe same part, covered across other Toyota models.