Toyota Corolla Rear Springs: Specs, Fitment & Common Faults

Confirmed directly in Toyota's own parts catalogue: left and right rear coil springs are listed as genuinely separate parts, not a single item fitted either side.

Illustration for editorial purposes

Left and Right Are Genuinely Separate Parts — Confirmed by Toyota's Own Catalogue

Genuinely worth knowing: Toyota's own parts catalogue lists rear coil springs as lower-left and lower-right references — distinct, non-interchangeable parts rather than a single spring fitted to either side. Where AWD is offered on this model, AWD and front-wheel-drive versions also use different springs, reflecting the different rear subframe and driveline layout.

Genuinely worth checking on hybrid models: some spring references are shared across hybrid and non-hybrid versions of the same generation, while others differ — confirm via VIN rather than assuming either way.

A Part That Fails Quietly, Then Suddenly

A rear spring often sags gradually for months without an obvious symptom beyond a slightly lower ride height, then fails suddenly at the coil's end with an audible clunk — worth bearing in mind if you notice one rear corner sitting lower than the other. Toyota's own guidance notes that coil springs aren't especially prone to failure under normal use, but cutting, clamping, or heating a spring (sometimes done to lower ride height) genuinely compromises it and can lead to premature failure.

Before you buy: hybrid vs non-hybrid, AWD where offered, and left/right side all potentially affect fitment. Always confirm against your VIN before ordering.

Toyota Corolla Rear Springs reference plate

OEM Part Numbers

Accuracy note: genuinely worth knowing: rear springs are listed by Toyota as lower-left and lower-right references specifically — not a generic "rear spring" part covering both sides.

Non-hybrid, lower right	Genuinely a different part number from the lower-left spring, and potentially from the hybrid version below — confirm side and powertrain before ordering
Non-hybrid, lower left	A genuinely different reference from the lower-right spring above
Hybrid, where distinct from non-hybrid	Confirm via VIN — some generations share references between hybrid and non-hybrid, others use a hybrid-specific spring

Always replace rear springs in pairs — a single new spring paired with an old, sagged one on the other side creates an uneven ride height and handling bias.

What It Does

The rear coil spring supports the weight of the car's rear end and absorbs the initial impact of a bump, working alongside the shock absorber rather than replacing its function. A sagged or broken spring lowers ride height, can affect headlight aim, and in severe cases is an MOT failure item.

Warning Signs, DIY Difficulty & Aftermarket Advice

These are the same regardless of make or model — see our full Rear Springs Guide for symptoms of a failing spring, confirming fitment against your VIN, and OEM vs aftermarket guidance.

More Toyota Rear Springs

The same part, covered across other Toyota models.

Toyota Corolla Rear Springs: Specs, Fitment & Common Faults

Left and Right Are Genuinely Separate Parts — Confirmed by Toyota's Own Catalogue

OEM Part Numbers

Shop for This Part on eBay