Toyota Yaris Rear Springs: Specs, Fitment & Common Faults
Confirmed directly in Toyota's own parts catalogue: left and right rear coil springs are listed as separate parts, not a single item fitted either side.
Opens live listings in a new tab.
OEM Part Number: confirm via VIN
Aftermarket coils: Monroe SP4124 / Suplex 35497
| Rear coil springs (aftermarket) | Monroe SP4124 (standard, 292 mm); Suplex 35497 (standard, 291 mm); Daco Germany 813924; Kamoka 2120645 |
|---|---|
| Genuine (OE) numbers quoted | None quoted in the catalogue listings — the genuine spring varies by engine, suspension type and body style, so order it against your VIN |
| Non-hybrid, lower right | a different part number from the lower-left spring, and potentially from the hybrid version below — confirm side and powertrain before ordering |
| Non-hybrid, lower left | A different reference from the lower-right spring above |
| Hybrid, where distinct from non-hybrid | Confirm via VIN — some generations share references between hybrid and non-hybrid, others use a hybrid-specific spring |
A single new rear spring on the Toyota Yaris, next to an old, sagged one, creates an imbalance — uneven ride height and a handling bias — which is why replacing them as a pair is the better approach.
Ordering coils for each side of the Yaris
Worth knowing: Toyota's own parts catalogue lists rear coil springs as lower-left and lower-right references — distinct, non-interchangeable parts rather than a single spring fitted to either side. Where AWD is offered on this model, AWD and front-wheel-drive versions also use different springs, reflecting the different rear subframe and driveline layout.
Corrosion, fatigue and broken coils
A rear spring often sags gradually for months without an obvious symptom beyond a slightly lower ride height, then fails suddenly at the coil's end with an audible clunk — worth bearing in mind if you notice one rear corner sitting lower than the other. Toyota's own guidance notes that coil springs aren't especially prone to failure under normal use, but cutting, clamping, or heating a spring (sometimes done to lower ride height) compromises it and can lead to premature failure.
What the coils do and what the dampers do
On the Toyota Yaris, bearing the rear end's weight and cushioning the initial jolt of a bump is the coil spring's role, complementing the shock absorber rather than duplicating its job. When it sags or breaks, ride height drops, headlight aim can be thrown off, and severe cases can mean an MOT failure.
Opens live listings in a new tab.
These are the same regardless of make or model — see our full Rear Springs Guide for symptoms of a failing spring, confirming fitment against your VIN, and OEM vs aftermarket guidance.
The same part on other modelsThe same part, covered across other Toyota models.