Hyundai i10 Radiator: Specs, Fitment & Common Faults
On the i10, a leak from the weep hole near the A/C compressor points toward a failing water pump seal.
Opens live listings in a new tab.
OEM Part Number: 25310B9150
As quoted in catalogue listings, confirm via VIN. Aftermarket units: Nissens 606399 / NRF 59262
| Radiators (aftermarket) | Nissens 606399 (420 x 366 x 22 mm, aluminium soldered core, plastic tanks, 1.0 G3LA 67 PS and 1.2 G4LA 87 PS); NRF 59262; Hella 8MK 366 303-711; Ava HY2589; AKS Dasis 560121N; Kamoka 7700252. |
|---|---|
| Core sizes & variants | Both petrol engines in the second-generation i10 share one radiator. The Nissens unit is listed with an integral oil cooler and a filler cap, so it suits automatic as well as manual cars. |
| Genuine (OE) numbers quoted | 25310B9150 |
| Fitment notes | Supplied with seals and a sealing cap; inlet and outlet are both 33 mm. |
Finding the source of a leak on the i10
If you're trying to pin down exactly where a coolant leak is coming from, a leak from the small weep hole in the engine block near the A/C compressor points toward a failing water pump seal rather than a more general leak elsewhere.
Also, the thermostat housing sits toward the front of the engine, higher up than where normal AC condensation would appear — worth checking this specific area if you're unsure whether water underneath the car is genuine coolant or harmless condensation.
Why the i10 depends on a healthy cooling pack
Unglamorous as it is, the Hyundai i10's cooling system sits behind nearly every serious engine failure that isn't just ordinary wear — and one that went unaddressed for too long. Noticing early warning signs here is a small cost against a potentially very large one.
Watch: replacing itSpanish removal video; generation not stated, most other i10 hits are fan or support-frame jobs.
Core, fins and fan: the i10's cooling explained
On the Hyundai i10, engine coolant sheds its heat into the passing air via the radiator, which is what keeps engine temperature in a safe working range. On automatics, it frequently pulls double duty cooling the transmission fluid through its own internal circuit — a detail that makes getting the exact part number right especially important.
Opens live listings in a new tab.
These are the same regardless of make or model — see our full Radiator Guide for the three common failure modes, confirming fitment against your VIN, and OEM vs aftermarket guidance.
The same part on other modelsThe same part, covered across other Hyundai models.