Car Parts Guide
RADIATOR Hyundai Kona · PARTS GUIDE

Hyundai Kona Radiator: Specs, Fitment & Common Faults

On the Kona, a leak from the weep hole near the A/C compressor points toward a failing water pump seal.

Hyundai Kona (2017 ON) radiator, core 648 x 315 mm, aftermarket Nissens 606261 Illustration for editorial purposes
Find Hyundai Kona Radiator Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN

Aftermarket units: Nissens 606261 / Denso DRM43019

Accuracy note: Covers the Hyundai Kona (2017-) as listed in the UK aftermarket catalogues. Radiators are sold by engine, gearbox and air-conditioning fitment, and one model usually has two or three different cores — a thicker core for diesels and automatics, a thinner one for small petrols — with different hose positions, so a radiator for the wrong engine will not connect up. The references below are UK aftermarket listings whose fitment lists name this generation, labelled by brand with the core size in mm; genuine numbers are those quoted against the listing. Check your engine code and whether the car has air conditioning against your VIN, and replace the coolant and bleed the system after fitting.
Radiators (aftermarket)Nissens 606261 (648 x 315 x 26 mm, without expansion tank); Nissens 607326 (650 x 291 x 32 mm, without sealing cap, without expansion tank, without gasket/seal); Nissens 606263 (610 x 403 x 16 mm, without cap, without expansion tank, with oil cooler, with gaskets/seals); Nissens 66763 (485 x 468 x 16 mm, without sealing cap, without expansion tank, with oil cooler, without gasket/seal); Nissens 67551 (487 x 468 x 26 mm, with cap, without expansion tank, with gaskets/seals); Denso DRM43019 (512 x 364 x 16 mm); NRF 550128 (650 x 300 x 24 mm); NRF 550349 (610 x 403 x 16 mm)
Core sizes & variantsSeveral different cores are listed across the 1.0 T-GDi, 1.6 T-GDi, 1.6 CRDi and hybrid versions; the automatic/DCT versions take a core with built-in oil cooler.
Genuine (OE) numbers quotedNone quoted in catalogue listings — order a genuine unit against your VIN
Fitment notesThe Kona Electric uses a different cooling pack entirely; these listings are for the petrol, diesel and hybrid cars.
Accuracy note: Hyundai radiator part numbers for the Kona frequently change mid-generation as engines are updated or facelifted, so a part valid for an early build year may not fit a later one even within the same model name.

A useful leak-tracing detail for the Kona

If you're trying to pin down exactly where a coolant leak is coming from, a leak from the small weep hole in the engine block near the A/C compressor points toward a failing water pump seal rather than a more general leak elsewhere.

If a leak returns despite a relatively recent replacement, internal seals or bearings within even a new pump can occasionally be compromised, or the pump can be damaged by an unrelated issue. It's worth checking the timing belt tensioner and pulleys for wear at the same time, since improper belt tension can itself damage an otherwise sound water pump.

Also, the thermostat housing sits toward the front of the engine, higher up than where normal AC condensation would appear — worth checking this specific area if you're unsure whether water underneath the car is genuine coolant or harmless condensation.

Why the Kona depends on a healthy cooling pack

It's an unglamorous part, but on the Hyundai Kona, the cooling system is behind almost every serious non-wear engine failure that could have been prevented. Spotting trouble here early is about as cheap an insurance policy as exists against an expensive repair bill.

Watch: replacing it

🎬 Watch: HOW TO REPLACE RADIATOR ON HYUNDAI, RADIATOR REMOVAL REPLACEMENT (sister (hyundai, model not stated in title))

Watch on YouTube ↗

Generic Hyundai radiator job; no Kona-specific video found

Hyundai Kona Radiator reference plate
Before you buy: radiator size and design vary significantly by engine size, transmission type, and whether your car has air conditioning. Always confirm against your VIN before ordering.

The job of the core

On the Hyundai Kona, heat from the engine coolant is shed to the surrounding air through the radiator, keeping engine temperature in a safe range. On automatic gearboxes, it often doubles up, cooling transmission fluid through a separate internal circuit too — which is why getting the exact part number right matters more here than on a simple heat exchanger.

Find Hyundai Kona Radiator Here!

Opens live listings in a new tab.

Faults, DIY difficulty and aftermarket advice

These are the same regardless of make or model — see our full Radiator Guide for the three common failure modes, confirming fitment against your VIN, and OEM vs aftermarket guidance.

The same part on other models

The same part, covered across other Hyundai models.