Toyota Avensis Front Bumper: Fitment, Sensors & Common Damage
On the Avensis, sensors are wired in series, meaning one faulty link can disable the whole system.
Opens live listings in a new tab.
OEM Part Number: confirm via VIN
Aftermarket covers: Van Wezel 5421570 / Blic 5510-00-8183900P
| Front bumper covers (aftermarket) | Van Wezel 5421570 (with fog light holes, with tow eye cover hole); Blic 5510-00-8183900P (from 04.2009); Blic 5510-00-8183902P (with headlamp washer holes, from 11.2008 to 12.2012); Blic 5510-00-8183904Q (from 01.2012); Klokkerholm 8183902 |
|---|---|
| Splitters, outer sections & trims | None listed separately |
| Genuine (OE) numbers quoted | None quoted in the catalogue listings — the genuine cover varies by body style, trim, parking sensors and fog lights, so order it against your VIN |
| Fitment notes | Match body style, trim, facelift date and the holes for parking sensors, fog lights and washer jets; covers come primed and need painting to your paint code before fitting. |
Tracing a total sensor failure on the Avensis
If the entire parking sensor system has stopped working rather than just one sensor, parking sensors on many Toyota models are wired in series, meaning a single faulty sensor or damaged wire can disable the whole system rather than just the affected sensor. It's worth methodically checking each sensor individually rather than assuming all have failed simultaneously.
Bear in mind that even a correct, genuine replacement sensor typically needs proper calibration through dealer-level diagnostic equipment before it works correctly — simply plugging in a new sensor isn't always enough.
A front-end scrape on the Avensis: what gets disturbed
There's more hidden in the Toyota Avensis's front bumper than most people expect: parking sensors, adaptive cruise control radar, and fog light housings are all routinely integrated, complicating what would otherwise be a simple replacement after minor impact damage.
Watch: replacing itWhat sits behind the paint
Beyond absorbing minor impacts, the front bumper on higher trims of the Avensis often houses parking sensors, the radar sensor used for adaptive cruise control, and fog lights. A bumper that looks compatible can still be missing the correct cutouts or mounting provisions for your specific trim's equipment.
Generations and Colour| All generations, standard trims | Super White 2, Eclipse Black, Silver Steel, Carlo Blue |
|---|---|
| Paint durability note | Super White 2 and Blizzard Pearl have a documented "sun-seeking" issue where the finish can prematurely fail on the roof and bonnet — worth inspecting these panels closely on a used example before assuming any chipping there is purely cosmetic |
Opens live listings in a new tab.
These are the same regardless of make or model — see our full Front Bumper Guide for common damage types to check for, confirming fitment against your VIN, and the sensor-calibration risk with cheap aftermarket covers.
The same part on other modelsThe same part, covered across other Toyota models.