Car Parts Guide
FRONT BUMPER Toyota C-HR · PARTS GUIDE

Toyota C-HR Front Bumper: Fitment, Sensors & Common Damage

On the C-HR, sensors are wired in series, meaning one faulty link can disable the whole system.

Toyota C-HR (2016 ON) front bumper, primed, aftermarket Van Wezel 5417574 Illustration for editorial purposes
Find Toyota C-HR Front Bumper Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN

Aftermarket covers: Van Wezel 5417574 / Van Wezel 5411577

Accuracy note: Covers the Toyota C-HR (2016-) as listed in the UK aftermarket catalogues. A front bumper is a body-coloured plastic skin, so what you buy is a primed cover that still needs painting to your paint code, and the right one depends on body style, trim, facelift date and the holes moulded into it for parking sensors, fog lights, headlamp washers or a tow eye cover. A cover without the right holes cannot be drilled accurately at home. The references below are UK aftermarket catalogue listings for this generation, labelled by brand with the fitment details the catalogue gives; carmakers rarely publish the genuine number against these, so order a genuine cover against your VIN if you want a guaranteed match. The splitters, outer sections and trims listed separately are the parts most often sold on their own after a car-park knock.
Front bumper covers (aftermarket)Van Wezel 5417574 (primed); Van Wezel 5411577 (primed, with parking sensor holes); Van Wezel 5417575 (primed, with parking sensor holes)
Splitters, outer sections & trimsPrasco TY7021001 (primed, with parking sensor holes, upper section); Van Wezel 5411576 (with fog light holes, lower section)
Genuine (OE) numbers quotedNone quoted in the catalogue listings — the genuine cover varies by body style, trim, parking sensors and fog lights, so order it against your VIN
Fitment notesMatch body style, trim, facelift date and the holes for parking sensors, fog lights and washer jets; covers come primed and need painting to your paint code before fitting.

How one bad sensor silences the rest on the C-HR

If the entire parking sensor system has stopped working rather than just one sensor, parking sensors on many Toyota models are wired in series, meaning a single faulty sensor or damaged wire can disable the whole system rather than just the affected sensor. It's worth methodically checking each sensor individually rather than assuming all have failed simultaneously.

One case saw a routine car wash trigger a "Parking Sensor Malfunction" warning immediately afterward, with the dealer refusing warranty coverage and blaming the car wash itself. If you experience this right after a wash, it's worth trying isopropyl alcohol on each sensor and allowing the car to fully dry before accepting a paid diagnosis.

Note too that even a correct, genuine replacement sensor typically needs proper calibration through dealer-level diagnostic equipment before it works correctly — simply plugging in a new sensor isn't always enough.

A front-end scrape on the C-HR: what gets disturbed

The Toyota C-HR's front bumper routinely integrates parking sensors, adaptive cruise control radar, and fog light housings, which means replacing it after even minor impact damage often involves more than a straightforward swap.

Watch: replacing it

🎬 Watch: Как да сваля предна броня на Toyota C-HR 2023

Watch on YouTube ↗

This one is narrated in another language, but the steps on screen are the same job.

Toyota C-HR Front Bumper reference plate
Before you buy: bumper specification varies significantly by trim, particularly around parking sensor cutouts, radar mounting points and fog light provisions. Always confirm against your VIN before ordering.

What sits behind the paint

Beyond absorbing minor impacts, the front bumper on higher trims of the C-HR often houses parking sensors, the radar sensor used for adaptive cruise control, and fog lights. A bumper that looks compatible can still be missing the correct cutouts or mounting provisions for your specific trim's equipment.

Generations, Derivatives and Colour
Standard trimsSuper White, Black, Silver Metallic, Ash Grey — many colours available as bi-tone with a contrast black roof
GR SportAsh Grey with a black roof is exclusive to this trim; comes with a Piano Black finish to the centre bumper and fog lamp surrounds, plus a bespoke, more aggressive front spoiler not fitted to standard trims
Find Toyota C-HR Front Bumper Here!

Opens live listings in a new tab.

Common damage, DIY difficulty and aftermarket advice

These are the same regardless of make or model — see our full Front Bumper Guide for common damage types to check for, confirming fitment against your VIN, and the sensor-calibration risk with cheap aftermarket covers.

The same part on other models

The same part, covered across other Toyota models.