Toyota Verso Front Bumper: Fitment, Sensors & Common Damage
On the Verso, sensors are wired in series, meaning one faulty link can disable the whole system.
Opens live listings in a new tab.
OEM Part Number: confirm via VIN
Aftermarket covers: Van Wezel 5491572 / Van Wezel 5491570
| Front bumper covers (aftermarket) | Van Wezel 5491572 (with fog light holes, with tow eye cover hole); Van Wezel 5491570 (with fog light holes, with tow eye cover hole); Van Wezel 5493572 (facelift); Van Wezel 5493570 (facelift); Diederichs 6619450 |
|---|---|
| Splitters, outer sections & trims | None listed separately |
| Genuine (OE) numbers quoted | None quoted in the catalogue listings — the genuine cover varies by body style, trim, parking sensors and fog lights, so order it against your VIN |
| Fitment notes | Match body style, trim, facelift date and the holes for parking sensors, fog lights and washer jets; covers come primed and need painting to your paint code before fitting. |
The module behind a complete sensor failure on the Verso
If the entire parking sensor system has stopped working rather than just one sensor, parking sensors on many Toyota models are wired in series, meaning a single faulty sensor or damaged wire can disable the whole system rather than just the affected sensor. It's worth methodically checking each sensor individually rather than assuming all have failed simultaneously.
Note too that even a correct, genuine replacement sensor typically needs proper calibration through dealer-level diagnostic equipment before it works correctly — simply plugging in a new sensor isn't always enough.
A front-end scrape on the Verso: what gets disturbed
The Toyota Verso's front bumper typically carries more than styling — parking sensors, adaptive cruise radar, and fog light housings are all commonly built in, so even a minor impact can mean more than a simple panel swap.
Watch: replacing itThis video shows a closely related car on the same platform, so the clips and fixings can differ slightly on yours.
Crash absorbers, reinforcement and the Verso's front cover
Beyond absorbing minor impacts, the front bumper on higher trims of the Verso often houses parking sensors, the radar sensor used for adaptive cruise control, and fog lights. A bumper that looks compatible can still be missing the correct cutouts or mounting provisions for your specific trim's equipment.
Generations and Colour| All generations | Super White, Decuma Grey, Nocturne Grey, Emotional Red |
|---|
Opens live listings in a new tab.
These are the same regardless of make or model — see our full Front Bumper Guide for common damage types to check for, confirming fitment against your VIN, and the sensor-calibration risk with cheap aftermarket covers.
The same part on other modelsThe same part, covered across other Toyota models.